Manual Test Report for XE 4.1.2

Last modified by Manuel Leduc on 2023/10/10

Introduction

The aim of this report is to test all features on XWiki Enterprise 4.x cycle and see that the everything is working before the release.

Tested using the following browsers

For the list of supported browsers please click here.

Firefox
13.0.1

Tested using the following Databases

For the list of supported databases please click here.

HyperSQL
2.2.8

Conclusions

Features

Register/Log-In/Log-Out

Feature Steps to followExpected ResultResultJIRA
"Register a new user" Click on "Register"; Fill in the fields; Click "Register" Check if Registration worksPass
"Log-In"Click on "Log-In"; Fill in the username; Fill in the Password; Click "Log-In" Check if Logging in worksPass
"Log-In"Click on "Log-In"; Fill in the wrong username; Fill in the Password; Click "Log-In" Check is allowed to loginPass
"Log-In" Click on "Log-In"; Fill in the username; Fill in the wrong Password; Click "Log-In" Check is allowed to loginPass
"Log-Out" & Log-In"Click on "Log-Out";Go do a any page except the WebHome page; Click on "Log-In"; Fill in the username; Fill in the  Password; Click "Log-In" Check if you will remain on the page you were before logging in;Pass
"Forgot username"Click on "Log-In"; click on "username" Redirect to Forgot Username pagePass
"Reset password"Click on "Log-In"; click on "password" Redirect to Reset Password pagePass
"Log-Out"Click on "Log-Out" Check if Logout worksPass

User Profile

Feature Steps to followExpected ResultResultJIRA
"Profile Page"Click on "Profile"; Click "Switch to Advanced edit mode"; Click "Save & View"Changes are savedPass
"Profile Page"Click on "Profile" ; Click "Switch to Simple edit mode"; Click "Save & View"Changes are savedPass
"Profile Page"Click on "Profile" ; Click "Default editor to use"; Select "Wiki"; Click "Save & View"Changes are saved; Go to a page and click "Edit"; Wiki editor should loadPass
"Profile Page"Click on "Profile" ; Click "Default editor to use"; Select "WYSIWYG"; Click "Save & View"Changes are saved; Go to a page and click "Edit"; WYSIWYG editor should loadPass
"Change your password" Click on "Profile" ; Click "Change your password"; Fill in the new password; Reenter the password; Click "Update" Changes are savedPass
"Modify your profile"Click on "Profile"; Click "Modify your profile"; Change your profile; Click "Preview"; Click "Back to Edit" Redirect to Edit pagePass
"Modify your profile"Click on "Profile"; Click "Modify your profile"; Change your profile; Click "Save & Continue" Changes are savedPass
"Modify your profile" Click on "Profile"; Click "Modify your profile"; Change your profile; Click "Save & View" Changes are savedPass
"Modify your profile"Click on "Profile"; Click "Modify your profile"; Click "Cancel" Changes are discardedPass
"Change Photo"Click on "Profile"; Click on the top right corner of your profile picture; Click "Cancel and return to document" Changes are discardedPass
"Change Photo"Click on "Profile"; Click on the top right corner of your profile picture; Upload a new image and press "upload" Image is uploaded and used as profile picturePass
"Change Photo"Click on "Profile"; Click "Change Photo"; Click on an existing photo; Click "Set this photo" Image is used as profile picturePass
"Watchlist"Click on "Watchlist"; Click "Watchlist"; Delete a watched page/space/wiki Changes are saved; Page/space/wiki is not listed anymorePass
"RSS Watchlist"Click on "Watchlist"; Click "Watchlist"; Click on the RSS Feed See the watchlist modifications as RSS feedPass

Action Menus

Brief testing of the action menus and the pages/spaces they point to. These pages/spaces (e.g. wysiwyg editing, administration) will be later the subject of more in depth testing.

"Add" Menu

Feature Steps to followExpected ResultResultJIRA
"Space"Hover over "Add"; Click on "Add Space"; Fill in a space name; Click "Create" Redirect to Create Space pagePass
"Page"Hover over "Add"; Click on "Page"Redirect to Create Page pagePass
"Page From Office Document"Hover over "Add"; Click on "Page From Office Document";Look at the OfficeImporter Documentation for instructions on how to setup and configure an OpenOffice serverPass-
"Comment to Page"Hover over "Add"; Click on the "Comment to Page"; Write a comment in the Text area; Press "Add Comment"The page should scroll down at the bottom in the Comments tab; You will see your comment added;Pass-
"Attachments to Page"Hover over "Add"; Click on the "Attachments to Page".The page should scroll down at the bottom in the Attachments tabPass-

"Wiki" Menu

Feature Steps to followExpected ResultResultJIRA
"Watch Space"Hover over "Wiki"; Click on "Watch Space"; See if the star turns yellow and the writing to "Unwatch Wiki"Pass-
"Watch Space"Hover over "Wiki"; Click on "Unwatch Space";See if the star turns gray and the writing to "Watch Wiki" Pass
"Administer Wiki"Hover over "Wiki"; Click on "Administer Wiki"Redirect to Administer Wiki pagePass-
"Document Index"Hover over "Wiki"; Click on "Document Index" Redirect to Document Index pagePass

"Space" Menu

Feature Steps to followExpected ResultResultJIRA
"Watch Space"Hover over "Space"; Click on "Watch Space"; See if the star turns yellow and the writing to "Unwatch Space"Pass
"Watch Space"Hover over "Space"; Click on "Unwatch Space";See if the star turns gray and the writing to "Watch Space" Pass
"Administer Space"Hover over "Space"; Click on "Administer Space"Redirect to Administer Space pagePass-
"Document Index"Hover over "Space"; Click on "Document Index" Redirect to Document Index pagePass

"Page" Menu

Feature Steps to followExpected ResultResultJIRA
"Watch Page"Hover over "Page"; Click on "Watch Page"; See if the star turns yellow and the writing to "Unwatch Space"Pass
"Watch Page"Hover over "Page"; Click on "Copy"; See if the star turns gray and the writing to "Watch Page"Pass
"Share Page by Email"Hover over "Page"; Click on "Share Page by Email";See if the javascript modal appears; Check if the fields and the layout are properly displayedPass-
"Copy"Hover over "Page"; Click on "Rename";Redirected to the Copy feature page.Pass-
"Rename"Hover over "Page"; Click on "Rename"; Select a new space; Insert the new page name; Click on "Rename"Redirected to the Rename feature page. Check if Rename feature worksPass-
"Delete"Hover over "Page"; Click on "Delete"; Redirected to a page and be asked for confirmationPass

"Profile" Menu

Feature Steps to followExpected ResultResultJIRA
"Profile"Hover over "Profile" menu and click on "Profile";Redirects to your profile pagePass-
"Preferences"Hover over "Profile" menu and click on "Preferences";Redirects to your profile preferencesPass-
"Watchlist"Hover over "Profile" menu and click on "Watchlist";Redirects to your profile watchlistPass-
"Network"Hover over "Profile" menu and click on "Network"Redirects to your profile network. Here you see the users you follow.Pass-

"Edit" Menu

Feature Steps to followExpected ResultResultJIRA
"Edit"Click on "Edit" Redirects to default edit mode of the pagePass
"Wiki"Hover over "Edit"; Click on "Wiki" Redirects to Wiki edit modePass
"WYSIWYG"Hover over "Edit"; Click on "WYSIWYG" Redirects to WYSIWYG edit modePass
"Inline Form" Hover over "Edit"; Click on "Inline Form" Redirects to InlinePass-
"Access Rights"Hover over "Edit"; Click on "Access Rights" Redirects to Access Rights edit modePass
"Objects" Hover over "Edit"; Click on "Objects" Redirects to Objects edit modePass
"Class" Hover over "Edit"; Click on "Class" Redirects to Class editPass

"Export" Menu

Feature Steps to followExpected ResultResultJIRA
"Export as PDF"Hover over "Export"; Click on "Export as PDF" Save file dialog appearsPass
"Export as RTF"Hover over "Export"; Click on "Export as RTF" Save file dialog appearsPass
"Export as HTML"Hover over "Export"; Click on "Export as HTML" Save file dialog appearsPass
"Export as XAR"Hover over "Export"; Click on "Export as XAR" Save file dialog appearsPass

"More Actions" Menu

Feature Steps to followExpected ResultResultJIRA
"Print Preview"Hover over "More Actions"; Click on "Print Preview" Button redirects to "Print Preview" page; Check if the layout of the page is ok and fit for printingPass
"View Source"Hover over "More Actions"; Click on "View Source" Button redirects to "View Source" pagePass

Action Stream

Feature Steps to followExpected ResultResultJIRA
Create PageCreate a page; Go to main page; See if the small icon denoting page creation is visible under your userPass
Edit Page Create a page; Edit the page again, and press "Save and View" Go to main page; See if the small icon denoting page editing is visible under your userPass
Delete PageDelete a page; Go to main page; See if the small icon denoting page deletion is visible under with userPass
Annotate Page Annotate a page; Go to main page; See if the small icon denoting page annotation is visible with your userPass
Comment on PageComment on a page; Go to main page; See if the small icon denoting page comment is visible with your userPass
Attach to Page Add an attachment to a page; Go to main page; See if the small icon denoting adding attachment is visible with your userPass
See all actions Go to main page; Press on the small arrow pointing down Drop down should expand; All previous actions should be visiblePass
See all actions in detail Go to main page; Press on the small arrow pointing down; Some of the actions from the list have their own arrow; Press each arrow and see more details regarding that action Drop down should expand; All previous actions should be visiblePass

Wiki Editor

You can find out more about the Wiki Editor and page editing in general by clicking here.
We recommend you also try our new WYSIWYG editor. To learn more about XWiki's GWT rich text editor and discover all its features you may want to take a look at the WYSIWYG editor user guide.

Feature Steps to followExpected ResultResultJIRA
"Edit a page"Hover over "Edit", Click on "Wiki" Button redirects to Wiki edit modePass

Multilingual Page

Feature Steps to followExpected ResultResultJIRA
"Add other languages to a page"Go to "Administer Wiki"; Click on "Localization"; Select "Yes" to Enable multilingual support; Add "fr", "en", "ro"; Go to the page you want to add translations to; Hover over "Edit", Click on "Wiki"; On the panel from the right side, click on the language you want to translate to; Add content and save; Switching from one language to another should change the UI language and the content also;Pass

Edit Title

Feature Steps to followExpected ResultResultJIRA
Page Edit TitleHover over "Edit", Click on "Wiki"; Change the title from the "Title" field; Click "Preview"; Click "Back to Edit" Title is changed in reviewPass
Page Edit TitleHover over "Edit", Click on "Wiki"; Change the title from the "Title" field; Click "Save & Continue" Title is savedPass
Page Edit Title Hover over "Edit", Click on "Wiki"; Change the title from the "Title" field; Click "Save & View" Title is saved and shown in Preview modePass

Text Formatting

Feature Steps to followExpected ResultResultJIRA
Make text "Bold"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Bold" button to make the text bold; Click "Preview"; Click "Back to Edit" Check if bold styling applies on previewPass
Make text "Bold"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Bold" button to make the text bold; Click "Save & Continue" Check if bold styling applies after savingPass
Make text "Bold"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Bold" button to make the text bold; Click "Save & View" Check if bold styling applies after saving and going in view modePass
Make text "Bold"Hover over "Edit", Click on "Wiki"; Click on the "Bold" button; Fill in some text instead of "Text in Bold"; Click "Save & View" Check if bold styling remains if content is changedPass
Make text "Italic" Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Italic" button; Click "Preview"; Click "Back to Edit" Check if italic styling applies on previewPass
Make text "Italic"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Italic" button; Click "Save & Continue" Check if italic styling applies after savingPass
Make text "Italic" Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Italic" button; Click "Save & View" Check if italic styling applies after saving and going in view modePass
Make text "Italic"Hover over "Edit", Click on "Wiki"; Click on the "Italic" button; Fill in some text instead of "Text in Italics"; Click "Save & View" Check if italic styling remains if content is changedPass
Make text "Underline"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Underline" button; Click "Preview"; Click "Back to Edit"  Check if underline styling applies on previewPass
Make text "Underline"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Underline" button; Click "Save & Continue" Check if underline styling applies after savingPass
Make text "Underline"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Underline" button; Click "Save & View" Check if underline styling applies after saving and going in view modePass
Make text "Underline"Hover over "Edit", Click on "Wiki"; Click on the "Underline" button; Fill in some text instead of "Text in Underline"; Click "Save & View" Check if underline styling remains if content is changedPass
Make text "Strikethrough"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Strikethrough" button; Click "Preview"; Click "Back to Edit" Check if Strikethrough styling applies on previewPass
Make text "Strikethrough"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Strikethrough" button; Click "Save & Continue" Check if Strikethrough styling applies after savingPass
Make text "Strikethrough"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Strikethrough" button; Click "Save & View" Check if Strikethrough styling applies after saving and going in view modePass
Make text "Strikethrough"Hover over "Edit", Click on "Wiki"; Click on the "Strikethrough" button; Fill in some text instead of "Strikethrough"; Click "Save & View" Check if Strikethrough styling remains if content is changedPass
Make text "Subscript"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Subscript" button; Click "Preview"; Click "Back to Edit" Check if Subscript styling applies on previewPass
Make text "Subscript"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Subscript" button; Click "Save & Continue" Check if Subscript styling applies after savingPass
Make text "Subscript"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Subscript" button; Click "Save & View" Check if Subscript styling applies after saving and going in view modePass
Make text "Subscript"Hover over "Edit", Click on "Wiki"; Click on the "Subscript" button; Fill in some text instead of "Text in subscript"; Click "Save & View" Check if Subscript styling remains if content is changedPass
Make text "Superscript" Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Superscript" button; Click "Preview"; Click "Back to Edit" Check if Superscript styling applies on previewPass
Make text "Superscript"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Superscript" button; Click "Save & Continue" Check if Superscript styling applies after savingPass
Make text "Superscript"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Superscript" button; Click "Save & View" Check if Superscript styling applies after saving and going in view modePass
Make text "Superscript"Hover over "Edit", Click on "Wiki"; Click on the "Superscript" button; Fill in some text instead of "Text in superscript"; Click "Save & View" Check if Superscript styling remains if content isPass
Make text "Bullets On / Off" Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Bullets On / Off" button to turn Bullets on; Click "Preview"; Click "Back to Edit" Check if formatting appliesPass
Make text "Bullets On / Off"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Bullets On / Off" button to turn Bullets on; Click "Save & Continue" Check if formatting appliesPass
Make text "Bullets On / Off"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Bullets On / Off" button to turn Bullets on; Click "Save & View" Check if formatting appliesPass
Make text "Bullets On / Off" Hover over "Edit", Click on "Wiki"; Click on the "Bullets On / Off" button to turn Bullets on; Fill in some text instead of "List item"; Click "Save & View" Check if formatting appliesPass
Make text "Numbering On / Off" functionality Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Numbering On / Off" button to turn Numbering on; Click "Preview"; Click "Back to Edit" Check if formatting appliesPass
Make text "Numbering On / Off"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Numbering On / Off" button to turn Numbering on; Click "Save & Continue" Check if formatting appliesPass
Make text "Numbering On / Off" Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Numbering On / Off" button to turn Numbering on; Click "Save & View" Check if formatting appliesPass
Make text "Numbering On / Off"Hover over "Edit", Click on "Wiki"; Click on the "Numbering On / Off" button to turn Numbering on; Fill in some text instead of "List item"; Click "Save & View" Check if formatting appliesPass
Make text "Heading 1" Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 1" button; Click "Preview"; Click "Back to Edit" Check if formatting appliesPass
Make text "Heading 1" Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 1" button; Click "Save & Continue" Check if formatting appliesPass
Make text "Heading 1"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 1" button; Click "Save & View" Check if formatting appliesPass
Make text "Heading 1"Hover over "Edit", Click on "Wiki"; Click on the "Heading 1" button; Fill in some text instead of "Heading 1"; Click "Save & View" Check if formatting appliesPass
Make text "Heading 2"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 2" button; Click "Preview"; Click "Back to Edit" Check if formatting appliesPass
Make text "Heading 2"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 2" button; Click "Save & Continue" Check if formatting appliesPass
Make text "Heading 2"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 2" button; Click "Save & View" Check if formatting appliesPass
Make text "Heading 2"Hover over "Edit", Click on "Wiki"; Click on the "Heading 1" button; Fill in some text instead of "Heading 2"; Click "Save & View" Check if formatting appliesPass
Make text "Heading 3"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 3" button; Click "Preview"; Click "Back to Edit" Check if formatting appliesPass
Make text "Heading 3"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 3" button; Click "Save & Continue" Check if formatting appliesPass
Make text "Heading 3"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 3" button; Click "Save & View" Check if formatting appliesPass
Make text "Heading 3" Hover over "Edit", Click on "Wiki"; Click on the "Heading 3" button; Fill in some text instead of "Heading 3"; Click "Save & View" Check if formatting appliesPass
Make text "Heading 4"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 4" button; Click "Preview"; Click "Back to Edit" Check if formatting appliesPass
Make text "Heading 4"Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 4" button; Click "Save & Continue" Check if formatting appliesPass
Make text "Heading 4" Hover over "Edit", Click on "Wiki"; Select some text; Click on the "Heading 4" button; Click "Save & View" Check if formatting appliesPass
Make text "Heading 4"Hover over "Edit", Click on "Wiki"; Click on the "Heading 4" button; Fill in some text instead of "Heading 4"; Click "Save & View" Check if formatting appliesPass
Feature Steps to followExpected ResultResultJIRA
Create "Internal Link" functionality Hover over "Edit", Click on "Wiki"; Click on "Internal Link"; Replace "Link Example" with an internal link; Click "Preview"; Click "Back to Edit" Check if Link feature works properlyPass
Create "Internal Link" functionality Hover over "Edit", Click on "Wiki"; Click on "Internal Link"; Replace "Link Example" with an internal link; Click "Save & Continue" Check if Link feature works properlyPass
Create "Internal Link" functionality Hover over "Edit", Click on "Wiki"; Click on "Internal Link"; Replace "Link Example" with an internal link; Click "Save & View" Check if Link feature works properlyPass
Create "Internal Link" functionality Hover over "Edit", Click on "Wiki"; Write an internal link; Select the link; Click on "Internal Link"; Click "Save & View" Check if Link feature works properlyPass
Create "External Link" functionality Hover over "Edit", Click on "Wiki"; Click on "External Link"; Replace "name of link" with some text; Replace example URL with a different URL; Click "Preview"; Click "Back to Edit" Check if Link feature works properlyPass
Create "External Link" functionality Hover over "Edit", Click on "Wiki"; Click on "External Link"; Replace "name of link" with some text; Replace example URL with a different URL; Click "Save & Continue" Check if Link feature works properlyPass
Create "External Link" functionality Hover over "Edit", Click on "Wiki"; Click on "External Link"; Replace "name of link" with some text; Replace example URL with a different URL; Click "Save & View" Check if Link feature worksPass
Create "External Link" functionality Hover over "Edit", Click on "Wiki"; Write a label and a link in the form "label>>link"; Select the label and the link; Click on "External Link"; Click "Save & View" Check if Link feature works properlyPass

Horizontal Ruler

Feature Steps to followExpected ResultResultJIRA
Add "Horizontal ruler" Hover over "Edit", Click on "Wiki"; Click on the "Horizontal ruler" button; Click "Preview"; Click "Back to Edit" Ruler should appear in Preview modePass
Add "Horizontal ruler" Hover over "Edit", Click on "Wiki"; Click on the "Horizontal ruler" button; Click "Save & Continue" Saves the page and remain in EditPass
Add "Horizontal ruler"Hover over "Edit", Click on "Wiki"; Click on the "Horizontal ruler" button; Click "Save & View" Saves the page and redirects to View modePass

Image

Feature Steps to followExpected ResultResultJIRA
"Attach image"Attach an image to a page; Hover over "Edit", Click on "Wiki"; Click on the "Attached image" button; Fill in the name of the image attached to the page; Click "Preview"; Click "Back to Edit" Image should appear in Preview odePass
"Attach image" Attach an image to a page; Hover over "Edit", Click on "Wiki"; Click on the "Attached image" button; Fill in the name of the image attached to the page; Click "Save & Continue" Saves the page and remains in Edit modePass
"Attach image"Attach an image to a page; Hover over "Edit", Click on "Wiki"; Click on the "Attached image" button; Fill in the name of the image attached to the page; Click "Save & View" Saves the page and redirects to EditPass

HTML Code

Feature Steps to followExpected ResultResultJIRA
Add "HTML Code"Hover over "Edit", Click on "Wiki"; Write some HTML code; Select the code; Click on "HTML Code"; Click "Preview"; Click "Back to Edit" Executed HTML code should appear in PreviewPass
Add "HTML Code"Hover over "Edit", Click on "Wiki"; Write some HTML code; Select the code; Click on "HTML Code"; Click "Save & Continue" Saves the page and remains in Edit modePass
Add "HTML Code"Hover over "Edit", Click on "Wiki"; Write some HTML code; Select the code; Click on "HTML Code"; Click "Save & View" Saves the page and redirects to Edit modePass
Add "HTML Code"Hover over "Edit", Click on "Wiki"; Click on "HTML Code"; Replace "<! Your HTML code here >" with some HTML code; Click "Save & View" Check is "HTML Code" button worksPass

Velocity Code

Feature Steps to followExpected ResultResultJIRA
Add "Velocity Code"Hover over "Edit", Click on "Wiki"; Write some Velocity code; Select the code; Click on "Velocity Code"; Click "Preview"; Click "Back to Edit" Executed velocity code should appear in Preview Not Tested
Add "Velocity Code"Hover over "Edit", Click on "Wiki"; Write some Velocity code; Select the code; Click on "Velocity Code"; Click "Save & Continue" Saves the page and remains in Edit mode Not Tested
Add "Velocity Code"Hover over "Edit", Click on "Wiki"; Write some Velocity code; Select the code; Click on "Velocity Code"; Click "Save & View" Saves the page and redirects to Edit mode Not Tested
Add "Velocity Code"Hover over "Edit", Click on "Wiki"; Click on "Velocity Code"; Replace "#* Your velocity code here *#" with some Velocity code; Click "Save & View" Check is "Velocity Code" button works Not Tested

Edit in full screen

Feature Steps to followExpected ResultResultJIRA
"Exit Full Screen"Hover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click on the "Exit full screen" green button Check is full screen feature works properlyPass
"Preview" in full screen Hover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click "Preview"; Click "Back To Edit" Check if preview works from full screenPass
"Save & Continue" in full screenHover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click "Save & Continue" Page is savedPass
"Save & View" in full screenHover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click "Save & View" Page is saved and redirected to View modePass
"Cancel" in full screenHover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click "Cancel" Cancels modifications made to document and redirects to View modePass

Preview/Save/Cancel

Feature Steps to followExpected ResultResultJIRA
"Preview"Hover over "Edit", Click on "WYSIWYG"; Click "Preview"; Click "Back to edit" Redirect back to Edit PagePass
"Save & Continue"Hover over "Edit", Click on "Wiki"; Click "Save & Continue" Saves the Page and remains in Edit ModePass
"Save & Continue"Hover over "Edit", Click on "Wiki"; Check "Is minor edit"; Click "Save & Continue" Saves the Page as a minor version and remains in Edit ModePass
"Save & Continue"Hover over "Edit", Click on "Wiki"; Type in a Comment; Click "Save & Continue" Saves the Page with a comment and remains in Edit ModePass
"Save & View"Hover over "Edit", Click on "Wiki"; Click "Save & View" Saves the Page and redirects to View ModePass
"Save & View"Hover over "Edit", Click on "Wiki"; Check "Is minor edit"; Click "Save & View" Saves the Page as minor version and redirects to View ModePass
"Save & View"Hover over "Edit", Click on "Wiki"; Type in a Comment; Click "Save & View" Saves the Page with a comment and redirects to View ModePass
"Cancel"Hover over "Edit", Click on "Wiki"; Click "Cancel" Cancels and returns to View ModePass
"Exit Full Screen"Hover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click on the "Exit full screen" blue button Check if editor becomes full screenPass
"Preview" in full screenHover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click "Preview"; Click "Back To Edit" Check if editor becomes full screen  and redirected back to Edit PagePass
"Save & Continue" in full screenHover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click "Save & Continue" Check if editor becomes full screen; Page saves; Page remains in edit modePass
"Save & View" in full screenHover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click "Save & View" Check if editor becomes full screen; Page saves; Redirected to View ModePass
"Cancel" in full screenHover over "Edit", Click on "Wiki"; Click on the "Edit in full screen" green button; Click "Cancel" Check if editor becomes full scree; Cancels and returns to View ModePass
"AutosaveHover over "Edit", Click on "Wiki"; Add some content; Check the "Autosave" checkbox;Check if editor automatically saves the pagePass

WYSIWYG Editor

To learn more about XWiki's GWT rich text editor and discover all its features you may want to take a look at the WYSIWYG editor user guide.

Feature Steps to followExpected ResultResultJIRA
"Edit a page" Hover over "Edit", Click on "WYSIWYG" Check is WYSIWYG Editor loadsPass
"Edit Section"Click on the small pencil icon near the section head in order to edit;Check is WYSIWYG Editor loadsPass-

Multilingual Page

Feature Steps to followExpected ResultResultJIRA
"Add other languages to a page"Go to "Administer WYSIWYG"; Click on "Localization"; Select "Yes" to Enable multilingual support; Add "fr", "en", "ro"; Go to the page you want to add translations to; Hover over "Edit", Click on "WYSIWYG"; On the panel from the right side, click on the language you want to translate to; Add content and save; Switching from one language to another should change the UI language and the content also;Pass

Edit Title

Feature Steps to followExpected ResultResultJIRA
Edit TitleHover over "Edit", Click on "WYSIWYG"; Change the title from the "Title" field; Click "Preview"; Click "Back to Edit" Redirect to Edit pagePass
Edit TitleHover over "Edit", Click on "WYSIWYG"; Change the title from the "Title" field; Click "Save & Continue" Saves and remains on Edit PagePass
Edit TitleHover over "Edit", Click on "WYSIWYG"; Change the title from the "Title" field; Click "Save & View" Saves and redirects to View PagePass
Feature Steps to followExpected ResultResultJIRA
"Link" >"Wiki Page..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Wiki Page..."; Click "X"  Check if modal worksPass-
"Link" >"Wiki Page..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Wiki Page..."; Click on a page; Click "Select"; Click "Previous"  Check if Link feature works properlyPass-
"Link" > "Wiki Page..." Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Wiki Page..."; Click on a page; Click "Select"; Type in a Label; Type in a Tooltip; Click "Create Link"  Check if Link feature works properlyPass-
"Link" > "Wiki Page..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Wiki Page..."; Click on a page; Click "Select"; Type in a Label; Check "Open In New Window"; Click "Create Link"  Check if Link feature works properlyPass-
"Link" > "Wiki Page..." visualHover over "Edit", Click on "WYSIWYG"; Click on "Link > Wiki Page..."; Click "All Pages"; Click on a page; Click "Select"; Check if Link feature works properlyPass-
"Link" > "Wiki Page..." Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Wiki Page..."; Click "All Pages"; Click on a page; Click "Select"; Type in a Label; Click "Create Link" Check if Link feature works properlyPass-
"Link" > "Wiki Page..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Wiki Page..."; Click "Search"; Type in a page name; Click "Search" Click on the page; Click "Select"; Type in a label; Click "Create Link" Check if Link feature works properlyPass-
"Link" > "Attached File..." visual Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Attached File..."; Click "Upload new file"; Click "Select"; Select a file from your computer; Click "Upload"; Check if Link feature works properlyPass-
"Link" > "Attached File..." Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Attached File..."; Click "X" Check if modal closes properlyPass-
"Link" > "Attached File..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Attached File..."; Click "Upload new file"; Click "Select"; Select a file from your computer; Click "Upload"; Click "Previous" Check if Link feature works properlyPass-
"Link" > "Attached File..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Attached File..."; Click "Upload new file"; Click "Select"; Select a file from your computer; Click "Upload"; Type in a Label; Type in a Tooltip; Click "Create Link"  Check if Link feature works properlyPass-
"Link" > "Attached File..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Attached File..."; Click "Upload new file"; Click "Select"; Select a file from your computer; Click "Upload"; Type in a Label; Check "Open In New Window"; Click "Create Link"  Check if Link feature works properlyPass-
"Link" > "Attached File..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Attached File..."; Click "All Pages" Click "Create Link"; Click on an attachment; Click "Select"; Type in a Label; Click "Create Link" Check if Link feature works properlyPass-
"Link" > "Web Page..." visualHover over "Edit", Click on "WYSIWYG"; Click on "Link > Web Page..." Check if Link feature works properlyPass-
"Link" > "Web Page..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Web Page..."; Click "X" Check if modal closes properlyPass-
"Link" > "Web Page..." Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Web Page..."; Type in the Webpage Address; Type in the Label; Type in the Tooltip; Click "Create Link" Check if Link feature works properlyPass-
"Link" > "Web Page..." Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Web Page..."; Type in the Webpage Address; Type in the Label; Check "Open In New Window"; Click "Create Link"Check if Link feature works properlyPass-
"Link" > "Email Address..." Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Email Address..."Check if Link feature works properlyPass-
"Link" > "Email Address..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Email Address..."; Click "X" Check if modal closes properlyPass-
"Link" > "Email Address..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Email Address..."; Type in the Email Address; Type in the Label; Type in the Tooltip; Click "Create Link" Check if Link feature works properlyPass-
"Link" > "Email Address..."Hover over "Edit", Click on "WYSIWYG"; Click on "Link > Email Address..."; Type in the Email Address; Type in the Label; Check "Open In New Window"; Click "Create Link"Check if Link feature works properlyPass-

Image

Feature Steps to followExpected ResultResultJIRA
"Insert Image..." Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click "X" Check if modal closes properlyPass
"Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Click "Previous" Check if Image feature works properlyPass
"Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Type the width of the image; Click "Insert Image" Check if Image feature works properlyPass
"Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Type the height of the image; Click "Insert Image" Check if Image feature works properlyPass
"Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Type the alternative text; Click "Insert Image" Check if Image feature works properlyPass
"Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Select the "Left" Horizontal Alignment; Click "Insert Image" Check if Image feature works properlyPass
"Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Select the "Center" Horizontal Alignment; Click "Insert Image" Check if Image feature works properlyPass
"Image" > "Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Select the "Right" Horizontal Alignment; Click "Insert Image" Check if Image feature works properlyPass
"Image" > "Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Select the "Top" Vertical Alignment; Click "Insert Image" Check if Image feature works properlyPass
"Image" > "Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Select the "Middle" Vertical Alignment; Click "Insert Image" Check if Image feature works properlyPass
"Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click on "Upload new image"; Click "Select"; Select an image from your computer; Click "Upload"; Select the "Bottom" Vertical Alignment; Click "Insert Image" Check if Image feature works properlyPass
"Insert Image..."Hover over "Edit", Click on "WYSIWYG"; Click on "Image > Insert Image..."; Click "All Pages"; Select a space; Select a page; Click "Update"; Click on an image; Click "Select"; Click "Insert Image" Check if Image feature works properlyPass

Table

Feature Steps to followExpected ResultResultJIRA
"Table" > "Insert Table..."Hover over "Edit", Click on "WYSIWYG"; Click on "Table > Insert Table..."; Click "X" Check if modal closes properlyPass
"Table" > "Insert Table..."Hover over "Edit", Click on "WYSIWYG"; Click on "Table > Insert Table..."; Click "Insert Table" Check if Table function works properlyPass
"Table" > "Insert Table..."Hover over "Edit", Click on "WYSIWYG"; Click on "Table > Insert Table..."; Uncheck "First Row Is A Header Row"; Click "Insert Table" Check if Table function works properlyPass

Macro

Feature Steps to followExpected ResultResultJIRA
"Macro" > "Insert Macro..."Hover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click "X" Check if modal closes properlyPass
"Box" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Box" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyPass
"Chart" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Chart" macro; Click "Select"; Fill in the required fields; Click "Insert Macro" Check if Macro works properlyPass
"Code" MacorHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Code" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyPass
"Error Message" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Error Message" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyPass
"Footnote" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Footnote" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlPass
"Formula" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Formula" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properly Not Tested
"Groovy" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Groovy" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properly Not Tested
"HTML" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "HTML" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properly Not Tested
"Id" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Id" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properly Not Tested
"Include" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Include" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyPass
"Info Message" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Info Message" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyPass
"Put Footnote" Macroy Hover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Put Footnote" macro; Click "Select"; Click "Insert Macro" Check if Macro works properlyPass
"Python" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Python" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyNot Tested
"RSS" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "RSS" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyPass
"Script" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Script" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properly Not Tested
"Table Of Contents" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Table Of Contents" macro; Click "Select"; Fill in the fields; Click "Insert Macro" Check if Macro works properlyPass
"User Avatar" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "User Avatar" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyPass
"Velocity" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Velocity" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properly Not Tested
"Warning Message" MacroHover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..." Click on the "Warning Message" macro; Click "Select"; Fill in the required field; Click "Insert Macro" Check if Macro works properlyPass
"Macro" > "Edit macro properties..." functionality Hover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..."; Insert a macro; Click on "Macro" > "Edit macro properties..."; Change the properties and click "Apply" Check if Macro works properlyPass
"Macro" > "Edit macro properties..."Hover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..."; Insert a macro and make sure it is expanded; Click on "Macro" > "Collapse" Check if Macro works properlyPass
"Macro" > "Edit macro properties..."Hover over "Edit", Click on "WYSIWYG"; Click on "Macro > Insert Macro..."; Insert a macro and make sure it is collapsed; Click on "Macro" > "Expand" Check if Macro works properlyPass

Import

Feature Steps to followExpected ResultResultJIRA
"Office Document"Hover over "Edit", Click on "WYSIWYG"; Click on "Import > Office Document"; Click "X" Check if modal closes properlyPass
"Office Content (Copy / Paste)"Hover over "Edit", Click on "WYSIWYG"; Click on "Import > Office Content (Copy / Paste)" Check if Copy/Paste function worksPass
"Office Content (Copy / Paste)"Hover over "Edit", Click on "WYSIWYG"; Click on "Import > Office Content (Copy / Paste)"; Click "X" Check if modal closes properlyPass
"Office Content (Copy / Paste)"Hover over "Edit", Click on "WYSIWYG"; Click on "Import > Office Content (Copy / Paste)"; Fill in the required field; Click "Import" Check if the Import function worksPass
"Office Content (Copy / Paste)"Hover over "Edit", Click on "WYSIWYG"; Click on "Import > Office Content (Copy / Paste)"; Fill in the required field; Check "Filter Styles"; Click "Import" Check if the Import function worksPass

Text Formatting

Feature Steps to followExpected ResultResultJIRA
Make text "Bold"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Bold" button to make the text bold Check if formatting appliesPass
Make text "Bold"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Bold" button to make the text bold; Click on the "Bold" button again to remove Bold Check if formatting appliesPass
Make text "Italic"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Italic" button Check if formatting appliesPass
Make text "Italic"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Italic" button to make the text Italic; Click on the "Italic" button again to remove Italic Check if formatting appliesPass
Make text "Underline"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Underline" button Check if formatting appliesPass
Make text "Underline"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Underline" button to make the text Underlined; Click on the "Underline" button again to remove Underline Check if formatting appliesPass
Make text "Strikethrough"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Strikethrough" button Check if formatting appliesPass
Make text "Strikethrough"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Strikethrough" button to make the text Strikethrough; Click on the "Strikethrough" button again to remove Strikethrough Check if formatting appliesPass
Make text "Subscript"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Subscript" button Check if formatting appliesPass
Make text "Subscript"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Subscript" button to make the text Subscript; Click on the "Subscript" button again to return the text to its original size Check if formatting appliesPass
Make text "Superscript"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Superscript" button Check if formatting appliesPass
Make text "Superscript"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Superscript" button to make the text Superscript; Click on the "Superscript" button again to return the text to its original size Check if formatting appliesPass
Make text "Bullets On / Off"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Bullets On / Off" button to turn Bullets on Check if formatting appliesPass
Make text "Bullets On / Off" functionality Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Bullets On / Off" button  to turn Bullets on;  Click on the "Bullets On / Off" button  to turn Bullets off Check if formatting appliesPass
Make text "Numbering On / Off"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Numbering On / Off" button to turn Numbering on Check if formatting appliesPass
Make text "Numbering On / Off"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on the "Numbering On / Off" button  to turn Numbering on;  Click on the "Numbering On / Off" button  to turn Numbering off Check if formatting appliesPass
Make text "Undo"Hover over "Edit", Click on "WYSIWYG"; Select some text; Format it; Click "Undo" Check if formatting appliesPass
Make text "Title 1"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on "Title 1" from the dropdown; Check if formatting appliesPass
Make text "Title 2" functionality Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on "Title 2" from the dropdown; Check if formatting appliesPass
Make text "Title 3"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on "Title 3" from the dropdown; Check if formatting appliesPass
Make text "Title 4"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on "Title 4" from the dropdown; Check if formatting appliesPass
Make text "Title 5"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on "Title 5" from the dropdown; Check if formatting appliesPass
Make text "Title 6"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on "Title 6" from the dropdown; Check if formatting appliesPass
Make text "Plain text"Hover over "Edit", Click on "WYSIWYG"; Select some text; Click on "Title 1" from the dropdown; Click on "Plain text" from the dropdown Check if formatting appliesPass
"Insert Horizontal Ruler"Hover over "Edit", Click on "WYSIWYG"; Click on "Insert Horizontal Ruler" Check if formatting appliesPass
"Insert Custom Character"Hover over "Edit", Click on "WYSIWYG"; Click on "Insert Custom Character"; Click "X" Check if modal closesPass
Make text "Insert Custom Character"Hover over "Edit", Click on "WYSIWYG"; Click on "Insert Custom Character"; Click on a character Check if formatting appliesPass
Make text "Edit In Full Screen"Hover over "Edit", Click on "WYSIWYG"; Click on the "Edit in full screen" green button; Click on the "Exit full screen" green button Check if full screen feature worksPass

Preview/Save/Cancel

Feature Steps to followExpected ResultResultJIRA
"Preview"Hover over "Edit", Click on "WYSIWYG"; Click "Preview"; Click "Back to edit" Redirect back to Edit PagePass
"Save & Continue"Hover over "Edit", Click on "WYSIWYG"; Click "Save & Continue" Saves the Page and remains in Edit ModePass
"Save & Continue"Hover over "Edit", Click on "WYSIWYG"; Check "Is minor edit"; Click "Save & Continue" Saves the Page as a minor version and remains in Edit ModePass
"Save & Continue"Hover over "Edit", Click on "WYSIWYG"; Type in a Comment; Click "Save & Continue" Saves the Page with a comment and remains in Edit ModePass
"Save & View"Hover over "Edit", Click on "WYSIWYG"; Click "Save & View" Saves the Page and redirects to View ModePass
"Save & View"Hover over "Edit", Click on "WYSIWYG"; Check "Is minor edit"; Click "Save & View" Saves the Page as minor version and redirects to View ModePass
"Save & View"Hover over "Edit", Click on "WYSIWYG"; Type in a Comment; Click "Save & View" Saves the Page with a comment and redirects to View ModePass
"Cancel"Hover over "Edit", Click on "WYSIWYG"; Click "Cancel" Cancels and returns to View ModePass
"Exit Full Screen"Hover over "Edit", Click on "WYSIWYG"; Click on the "Edit in full screen" green button; Click on the "Exit full screen" blue button Check if editor becomes full screenPass
"Preview" in full screenHover over "Edit", Click on "WYSIWYG"; Click on the "Edit in full screen" green button; Click "Preview"; Click "Back To Edit" Check if editor becomes full screen  and redirected back to Edit PagePass
"Save & Continue" in full screenHover over "Edit", Click on "WYSIWYG"; Click on the "Edit in full screen" green button; Click "Save & Continue" Check if editor becomes full screen; Page saves; Page remains in edit modePass
"Save & View" in full screenHover over "Edit", Click on "WYSIWYG"; Click on the "Edit in full screen" green button; Click "Save & View" Check if editor becomes full screen; Page saves; Redirected to View ModePass
"Cancel" in full screenHover over "Edit", Click on "WYSIWYG"; Click on the "Edit in full screen" green button; Click "Cancel" Check if editor becomes full scree; Cancels and returns to View ModePass

Edit in Source

Feature Steps to followExpected ResultResultJIRA
Edit in SourceHover over "Edit", Click on "WYSIWYG"; Click "Source"; Click "Preview"; Click "Back to Edit" Redirect back to Edit PagePass
Edit in SourceHover over "Edit", Click on "WYSIWYG"; Click "Source"; Click "Save & Continue" Saves the Page and remains in Edit ModePass
Edit in SourceHover over "Edit", Click on "WYSIWYG"; Click "Source"; Click "Save & View" Saves the Page and redirects to View ModePass
Edit in SourceHover over "Edit", Click on "WYSIWYG"; Click "Source"; Click "Cancel" Cancels and returns to View ModePass

Access Rights

Feature Steps to followExpected ResultResultJIRA
Access RightsHover over "Edit", Click on "Access Rights"; Select the "Users" checkbox; for a specific user deny the view rights on the page by pressing twice in the checkbox until a deny sign appears; Login with the specified user;Logged in with that user should not allow you to view that pagePass
Access RightsHover over "Edit", Click on "Access Rights"; Select the "Users" checkbox; for a specific user deny the comment rights on the page by pressing twice in the checkbox until a deny sign appears; Login with the specified user;Logged in with that user should not allow you to comment on that pagePass
Access RightsHover over "Edit", Click on "Access Rights"; Select the "Users" checkbox; for a specific user deny the edit rights on the page by pressing twice in the checkbox until a deny sign appears; Login with the specified user;Logged in with that user should not allow you to edit that pagePass
Access RightsHover over "Edit", Click on "Access Rights"; Select the "Users" checkbox; for a specific user deny the delete rights on the page by pressing twice in the checkbox until a deny sign appears; Login with the specified user;Logged in with that user should not allow you to delete that pageNot Tested
Access RightsHover over "Edit", Click on "Access Rights"; Select the "Groups" checkbox; for a specific group deny the view rights on the page by pressing twice in the checkbox until a deny sign appears; Login with the specified user;Logged in with that group should not allow you to view that pagePass
Access RightsHover over "Edit", Click on "Access Rights"; Select the "Groups" checkbox; for a specific group deny the comment rights on the page by pressing twice in the checkbox until a deny sign appears; Login with the specified user;Logged in with that group should not allow you to comment on that pagePass
Access RightsHover over "Edit", Click on "Access Rights"; Select the "Groups" checkbox; for a specific group deny the edit rights on the page by pressing twice in the checkbox until a deny sign appears; Login with the specified user;Logged in with that group should not allow you to edit that pagePass
Access RightsHover over "Edit", Click on "Access Rights"; Select the "Groups" checkbox; for a specific group deny the delete rights on the page by pressing twice in the checkbox until a deny sign appears; Login with the specified user;Logged in with that group should not allow you to delete that page Not Tested

Objects & Classes Editing

Soon

Administration

Space Administration

Presentation

Feature Steps to followExpected ResultResultJIRA
"Presentation"Hover over "Space"; Click on "Administer Space"; Click on "Presentation" Redirects to Presentation PagePass
"Presentation"Hover over "Space"; Click on "Administer Space"; Click on "Presentation"; Change a field; Click "Save" Check if the fields are savedPass
"Presentation"Hover over "Space"; Click on "Administer Space"; Click on "Presentation"; Click "Customize" Redirect to Skin Customization PagePass
"Presentation"Hover over "Space"; Click on "Administer Space"; Click on "Presentation"; Change a field; Click "Save" Check if the fields are savedPass

Page Elements

Feature Steps to followExpected ResultResultJIRA
"Page Elements"Hover over "Space"; Click on "Administer Space"; Click on "Page Elements" Redirects to Page Elements Page
Pass
"Page Elements"Hover over "Space"; Click on "Administer Space"; Click on "Page Elements"; Change a field; Click "Save" Check if the fields are savedPass

Panel Wizard

Feature Steps to followExpected ResultResultJIRA
"Panel Wizard" Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard" Redirects to Panels PagePass
"Panel List" Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; Change a field; Click "Save"Check if the fields are savedPass
"Panel List"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; click on the accordion headers Accordion to work properlyPass
"Panel List"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; drag and drop a panel from the panel list to the side Check if Drag and drop worksPass
"Panel Expand/Collapse"On the left side in the Panels section, click once on a Panel's Head; Click again;Check if the Panels collapses/expandsPass-
"Panel List"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; drag and drop a panel from the panel list to the side; Click "Save The New Layout"; Navigate to a different page and check if the panel is still where you dropped itPass
"Panel List"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; drag and drop a panel from the side to the panel listCheck if Drag and drop worksPass
"Panel List"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; drag and drop a panel from the side to the panel list; Click "Save The New Layout"; Navigate to a different page and check if the panel is still where you dropped itPass
"Page Layout"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "No side column"; "Click Save The New Layout";Go to a different page to check if the new layout is in placePass
"Page Layout"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "Left Column"; Click on "Panel List"; Drag a panel to the left; "Click Save The New Layout";Go to a different page to check if the new layout is in placePass
"Page Layout"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "Right Column"; Click on "Panel List"; Drag a panel to the right; "Click Save The New Layout";Go to a different page to check if the new layout is in placePass
"Page Layout"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "Both Columns"; Click on "Panel List"; Drag a panel to the left and a panel to the right; "Click Save The New Layout"; Go to a different page to check if the new layout is in placePass
"Page Layout"Hover over "Space"; Click on "Administer Space"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "Go To Panels Home Page" Pass

Rights

Feature Steps to followExpected ResultResultJIRA
"Rights"Hover over "Space"; Click on "Administer Space"; Click on "Rights" Redirects to Rights PagePass
"Rights"Hover over "Space"; Click on "Administer Space"; Click on "Rights";Select "Users" See if the list of users appearsPass
"Rights"Hover over "Space"; Click on "Administer Space"; Click on "Rights"; Click once in one of the empty boxes See if the green check sign appears inside the boxPass
"Rights"Hover over "Space"; Click on "Administer Space"; Click on "Rights"; Click twice in one of the empty boxes See if the denied icon appears inside the boxPass

Wiki Administration

Edit Mode Settings

Feature Steps to followExpected ResultResultJIRA
"Edit Mode Settings"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Edit Mode Settings" Redirects to  Edit Mode SettingspagePass
"Edit Mode Settings"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Edit Mode Settings"; Change a field; Click "Save" Check if the fields are savedPass
"Default Editor to use"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Edit Mode Settings"; Change the default editor to "Text"Edit a page and see if the loaded editor will be the "Wiki" editorPass-
"Default document syntax "Hover over "XWiki"; Click on "Administer Wiki"; Click on "Edit Mode Settings"; Change the default syntax to "1.0". Create a new page.The page you created should be in 1.0 syntaxPass-
"Default document syntax "Hover over "XWiki"; Click on "Administer Wiki"; Click on "Edit Mode Settings"; Change the default syntax to "2.0". Create a new page.The page you created should be in 2.1 syntaxPass-

Localization

Feature Steps to followExpected ResultResultJIRA
"Localization"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Localization" Redirects to  Localization page
Pass
"Localization"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Localization"; Change a field; Click "Save" Check if the fields are savedPass
"Multi Lingual"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Localization"; Set multilingual to "Yes";On the top right corner, you should have all languages displayedPass-

Email

Feature Steps to followExpected ResultResultJIRA
"Email"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Email" Redirects to Email page
Pass
"Email"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Email"; Change a field; Click "Save" Check if the fields are savedPass

OpenOffice Server

Feature Steps to followExpected ResultResultJIRA
"OpenOffice Server"Hover over "XWiki"; Click on "Administer Wiki"; Click on "OpenOffice Server" Redirects to OpenOffice pagePass
"OpenOffice Server"Hover over "XWiki"; Click on "Administer Wiki"; Click on "OpenOffice Server"; Select "Start server (connect)"; Click "Update" Starts the server; Status should indicate startedPass
"OpenOffice Server"Hover over "XWiki"; Click on "Administer Wiki"; Click on "OpenOffice Server"; Select "Stop server (disconnect)"; Click "Update" Stops the server; Status should indicate stoppedPass
"OpenOffice Server"Hover over "XWiki"; Click on "Administer Wiki"; Click on "OpenOffice Server"; Select "Restart server"; Click "Update" Restarts the server; Status should indicate startedPass

Presentation

Feature Steps to followExpected ResultResultJIRA
"Presentation"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Presentation" Redirects to Presentation PagePass
"Presentation"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Presentation"; Change a field; Click "Save" Check if the fields are savedPass
"Presentation"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Presentation"; Change the colortheme; Click "Save" Check if the fields are savedPass

Page Elements

Feature Steps to followExpected ResultResultJIRA
"Page Elements"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Page Elements" Redirects to Page Elements Page
Pass
"Page Elements"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Page Elements"; Change a field; Click "Save" Check if the fields are savedPass

Panel Wizard

Feature Steps to followExpected ResultResultJIRA
"Panel Wizard" Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard" Redirects to Panels PagePass
"Panel List"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; click on the accordion headers Accordion to work properlyPass
"Panel List"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; drag and drop a panel from the panel list to the side Check if Drag and drop worksPass
"Panel Expand/Collapse"On the left side in the Panels section, click once on a Panel's Head; Click again;Check if the Panels collapses/expandsPass-
"Panel List"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; drag and drop a panel from the panel list to the side; Click "Save The New Layout"; Navigate to a different page and check if the panel is still where you dropped itPass
"Panel List"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; drag and drop a panel from the side to the panel listCheck if Drag and drop worksPass
"Panel List"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; drag and drop a panel from the side to the panel list; Click "Save The New Layout"; Navigate to a different page and check if the panel is still where you dropped itPass
"Page Layout"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "No side column"; "Click Save The New Layout";Go to a different page to check if the new layout is in placePass
"Page Layout"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "Left Column"; Click on "Panel List"; Drag a panel to the left; "Click Save The New Layout";Go to a different page to check if the new layout is in placePass
"Page Layout"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "Right Column"; Click on "Panel List"; Drag a panel to the right; "Click Save The New Layout";Go to a different page to check if the new layout is in placePass
"Page Layout"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "Both Columns"; Click on "Panel List"; Drag a panel to the left and a panel to the right; "Click Save The New Layout"; Go to a different page to check if the new layout is in placePass
"Page Layout"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; Click on "Page Layout"; Click on "Go To Panels Home Page" You are redirected to Panels.WebHome pagePass
2 Panel ColumnsHover over "XWiki"; Click on "Administer Wiki"; Click on "Panel Wizard"; Click on "Page Layout"; Select "Both Columns"; Switch back to the "Panel List" tab and drag a panel on the left side of the page; Click on "Save the new Layout";  Go to the main page and check if the layout is not brobkenPass

Users

Feature Steps to followExpected ResultResultJIRA
"Users"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Users" Redirects to Users PagePass
"Users"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Users"; Click on the pen to edit; Edit a user and click "Save"; Modify the User info and Click "Cancel" Check if settings are discardedPass
"Users"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Users"; Click on the pen to edit; Edit a user and click "Save"; Modify the User info and Click "Save"Check if settings are savedPass-
"Users" Hover over "XWiki"; Click on "Administer Wiki"; Click on "Users"; Click on the pen to edit; Click "X" Check if modal closes properlyPass
"Users"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Users"; Click on the pen to edit; Click on "Preferences" tab; Click "Switch to Simple edit mode" Check if switch worksPass
"Users"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Users"; Click on the pen to edit; "Switch to Advanced edit mode"Check if switch worksPass
"Users"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Users"; Click on "Add new user"; Click "X" Check if modal closes properlyPass
"Users"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Users"; Click on "Add new user"; Fill in the fields; Click "Save" Check is new user was addedPass

Groups

Feature Steps to followExpected ResultResultJIRA
"Groups "Hover over "XWiki"; Click on "Administer Wiki"; Click on "Groups" Redirects to Groups PagePass
"Groups"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Groups"; Click on the pen to edit Check if edit window appearsPass
"Groups"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Groups"; Click on the pen to edit; Click "X" Check if modal closes properlyPass
"Groups"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Groups"; Click on the pen to edit; Add user to group; Click "Add"; Click on the pen to edit; Click "Remove" Check if adding/removing a user from group worksPass
"Groups"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Groups"; Click on the pen to edit; Add subgroup; Click "Add" Check if adding subgroups worksPass
"Groups"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Groups"; Click on "Add new group"; Create a group; Delete the group; Check if adding/deleting  groups worksPass
"Groups"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Groups"; Click on "Add new group"; Click "X" Check if modal closes properlyPass
"Groups"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Groups"; Click on an existing group; Click on "Edit" button; Redirect to Group Edit pagePass-

Rights

Feature Steps to followExpected ResultResultJIRA
"Rights"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Rights" Redirects to Rights PagePass
"Rights"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Rights";Select "Users" See if the list of users appearsPass
"Rights"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Rights"; Click once in one of the empty boxes See if the green check sign appears inside the boxPass
"Rights"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Rights"; Click twice in one of the empty boxes See if the denied icon appears inside the boxPass

Registration

Feature Steps to followExpected ResultResultJIRA
"Registration"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Registration" Redirects to Registration PagePass
"Registration"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Registration"; Change a field; Click "Save" Check if the fields are savedPass

Import

Feature Steps to followExpected ResultResultJIRA
"Import"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Import" Redirects to Import PagePass
"Import" Hover over "XWiki"; Click on "Administer Wiki"; Click on "Import"; Add a XAR attachment; Click "Attach"; Click on the XAR attachment in the table, click "none" Selects none of the pages from the XARPass-
"Import"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Import"; Add a XAR attachment; Click "Attach"; Click on the XAR attachment in the table, click "all" Selects all of the pages from the XARPass-
"Import"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Import"; Add a XAR attachment; Click "Attach"; Click on the XAR attachment in the table, click "Import" Check if the XAR is imported into the WikiPass-
"Import"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Import"; Add a XAR attachment; Click "Attach"; Click on "Delete" in the table; Click "OK/Cancel"Check if attachment is deletedPass-

Export

Feature Steps to followExpected ResultResultJIRA
"Export"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Export" Redirects to Export page
Pass
"Export"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Export"; Fill in the fields; Click "Export" Save file dialog should appearPass

Templates

Feature Steps to followExpected ResultResultJIRA
"Templates"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Templates" Redirects to Template page
Pass
"Templates"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Templates"; Change a field; Click "Save" Check if the fields are savedPass
Create Page from TemplateHover over "XWiki"; Click on "Administer Wiki"; Click on "Templates";  Change a field; Click "Save" Check if the fields are savedPass
Create Page from TemplateCreate a page and add some text; Hover over "XWiki"; Click on "Administer Wiki"; Click on "Templates";Click on "Create" button; In the "Template to use" field, put the space.page name of created page; Click "Save and View"; Create a new page using the template; The contents of t he new page should contain the one from the TemplatePass

http://platform.xwiki.org/xwiki/bin/view/Features/DocumentLifecycle#HCreatefromTemplate

Annotations

Feature Steps to followExpected ResultResultJIRA
"Annotations"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Annotations" Redirects to Annotations page
Pass
"Annotations"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Annotations"; Change a field; Click "Save" Check if the fields are savedPass
"Annotations"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Annotations"; Change the "Annotations are activated" to "No"Check if the annotations are deactivatedPass-
"Annotations"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Annotations";Change the "Display annotations by default " to "Yes"All the Annotations you made should be visible without invoking the top panel.Pass-

Invitation Application

Feature Steps to followExpected ResultResultJIRA
"Invitation Application"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Invitation Application" Redirects to Invitation Application page
Pass
"Invitation Application"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Invitation Application"; Change a field; Click "Save" Check if the fields are savedPass

Search

Feature Steps to followExpected ResultResultJIRA
"Search"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Search" Redirects to Search page
Pass
"Search"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Search"; Change a field; Click "Save" Check if the fields are savedPass
"Search engine to use"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Search"; Change the "Search engine to use" to "database"; Click "Update" buttonSee if Searching for something worksPass-
"Jump to Page"Press the CTRL+G; A modal windows should appear; Type  the name of a page that exists and press "Enter"You should be redirected to that pagePass-
"Jump to Page"On the "Quick Links" Panel on the left side click the "Jump to any page in the wiki" link; A modal windows should appear; Type  the name of a page that exists and press "Enter"You should be redirected to that pagePass-

Search Suggest

Feature Steps to followExpected ResultResultJIRA
"Search Suggest"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Search Suggest" Redirects to Search Suggest page
Pass
"Search Suggest"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Search Suggest"; Change a field; Click "Save" Check if the fields are savedPass
"Search Suggest"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Search Suggest"; Change the "Activated" dropdown to "No"; Click "Save"Search Suggest feature should be disabledPass-

Extension Manager

Feature Steps to followExpected ResultResultJIRA
"Extension Manager"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Extension Manager" Redirects to Extension Manager page
Pass
"Extension Manager"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Extension Manager"; Change a field; Click "Save" Check if the fields are savedPass

WYSIWYG Editor

Feature Steps to followExpected ResultResultJIRA
"WYSIWYG Editor"Hover over "XWiki"; Click on "Administer Wiki"; Click on "WYSIWYG Editor" Redirects to WYSIWYG Editor page
Pass
"WYSIWYG Editor"Hover over "XWiki"; Click on "Administer Wiki"; Click on "WYSIWYG Editor"; Change a field; Click "Save" Check if the fields are saved and configuration is changedPass

Message Stream

Feature Steps to followExpected ResultResultJIRA
"Message Stream"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Message Stream" Redirects to Message Stream page
Pass
"Message Stream"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Message Stream"; Change a field; Click "Save" Check if the fields are savedPass
"Message Stream"Hover over "XWiki"; Click on "Administer Wiki"; Click on "Message Stream"; Change the "Enable the message stream " dropdown to "No"Message Stream from your user profile or Homepage should not be therePass-

Comments/Annotations/Attachments/History/Information Tabs

 A blog post is used to test the tabs 

Comments

Feature Steps to followExpected ResultResultJIRA
"Comments" CancelClick on "Comments ()"; Write a comment; Click "Cancel" Cancels the comment operationPass
"Comments" AddClick on "Comments ()"; Write a comment; Click "Add Comment" Adds a comment; Comment should be visible in comment listPass
"Comments" Add ReplyClick on "Comments ()"; Write a comment; Click "Add Comment";Click "Reply"; Write a reply; Click "Cancel" Adds a reply to a comment; Reply should be visible in comment listPass
"Comments" DeleteClick on "Comments ()"; Write a comment; Click "Add Comment"; Click "X" Deletes a comment; Comment should dissapearPass
"Comments" PreviewClick on "Comments ()"; Write a comment; Click "Preview Comment"; Click "Add Comment" Previews a comment; Comment should be savedPass
"Comments" PreviewClick on "Comments ()"; Write a comment; Click "Preview Comment"; Click "Cancel" Previews a comment; Comment should be discardedPass

Annotations

Feature Steps to followExpected ResultResultJIRA
"Annotate" a piece of contentSelect the text you want to annotate. Press CTRL+M and write some text. Click on the "Annotations" button and select "Display Annotations"Small yellow icon near the annotated text. Check the Annotations tab from bottom and check if the newly added annotation is therePass
"Delete Annotation"Select the text you want to annotate. Press CTRL+M and write some text. Click on the "Annotations" button and select "Display Annotations". Click on the small yellow icon and press the delete buttonCheck if the yellow icon disappears. Also, check the Annotations tab from bottom and see if the Annotation has disappeared.Pass
"Delete Annotation"Select the text you want to annotate. Press CTRL+M and write some text. Click on the "Annotations" button and select "Display Annotations".Go to the Annotations tab on the bottom of the page and press the delete buttonCheck if the yellow icon disappears. Also, check the Annotations tab from bottom and see if the Annotation has disappearedPass-
"Edit Annotation"Select the text you want to annotate. Press CTRL+M and write some text. Click on the "Annotations" button and select "Display Annotations". Click on the small yellow icon and press the delete buttonCheck if the Annotation has changed its content. Also, check the Annotations tab at the bottom of the page.Pass
"Edit Annotation"Select the text you want to annotate. Press CTRL+M and write some text. Click on the "Annotations" button and select "Display Annotations". Go to the Annotations tab on the bottom of the page and click on the small pencil icon and change the textCheck if the Annotation has changed its content. Also, check the Annotations tab at the bottom of the page.Pass-
"Annotate" a piece of contentSelect the text you want to annotate. Press CTRL+M and write some text. Click on the "Annotations" button and select "Display Annotations". Repeat again this process exactly on the same text you selected before. Only the newer Annotations should be visiblePass-
"Annotate" a piece of contentSelect the text you want to annotate. Press CTRL+M and write some text. Click on the "Annotations" button and select "Display Annotations". Repeat again this process logged as another user. Then, go to Annotations section from the page, and check the user you want to see annotations from.You should see only the annotations made with that usernamePass-
"Annotations Tab" Select the text you want to annotate. Press CTRL+M and write some text. Go to the Annotations() tab on the bottom of the page and click the small pencil icon; Change the test and click "Update"You should see only the annotations made with that username in the page; Also check if the Annotations tab is updatedPass-
"Annotations Tab" Select the text you want to annotate. Press CTRL+M and write some text. Go to the Annotations() tab on the bottom of the page and click the small delete icon; Click "Yes" to confirm;You should not see the annotation anymore; Check it disappears from the page, and also from the Annotations tab;Pass-

Attachments

Feature Steps to followExpected ResultResultJIRA
"Attachments" CancelClick on "Attachments ()"; Browse for a document; Click "Cancel" Cancels the attachment operationPass
"Attachments" AddClick on "Attachments ()"; Browse for a document; Click "Attach" Attaches a file; Attachment should become visible in listPass
"Attachments" Add another fileClick on "Attachments ()"; Browse for a document; Click "Add another file" Attaches another file; Attachment should become visible in listPass
"Attachments" VersionClick on "Attachments ()"; Browse for a document;  Browse for a document; Click "Attach"; Attach again the same file Check if there is created another version on the same attachment; Check if both attachments are accessiblePass
"Attachments" Office Preview start the OpenOffice Server from Administration section; Click on "Attachments ()"; Attach a document like odt, doc; Click on the small eye icon corresponding to the attached documentA new browser tab will open where you will be able to see the document you importedPass

History

Feature Steps to followExpected ResultResultJIRA
"History"Click on "History" History tab visiblePass
"History"Click on "History"; Click on a version View the page at clicked versionPass
"History"Click on "History"; Click "delete"; Click "Yes/No" Delete versionPass
"Show Minor Edits"Click on "History"; Click "Show Minor Edits" Shows the list of version including minor versionsPass
"Show Minor Edits"Click on "History"; Click "Show Minor Edits"; Click "Rollback" Rolls back the document at desired versionPass
"Show Minor Edits"Click on "History"; Click "Show Minor Edits"; Click "Delete"; Click "Yes/No"Delete minor versionPass
"Show Minor Edits"Click on "History"; Click "Show Minor Edits"; Select a version range; Click on "Compare Selected Versions" Redirect to compare pagePass
"Show Minor Edits"Click on "History"; Click "Show Minor Edits"; Select a version range; Click on "Delete Selected Version Range" Delete minor versions rangeFailedhttp://jira.xwiki.org/browse/XWIKI-7988
"Show Minor Edits"Click on "History"; Click "Show Minor Edits"; Click "Hide Minor Edits"; Click "Show Minor Edits" Shows only major/minor  versionsPass
"History"Create or go to a page that has a lot of major versions; Click on "History"; Click on the ">" to go to the next page of versions;SSee if the layout is not broken when moving next and previous on the history versionsPass

Information

Feature Steps to followExpected ResultResultJIRA
"Information" functionality Click on "Information" Redirect to information panelPass

Tags

Feature Steps to followExpected ResultResultJIRA
"Add a Tag"From a page, add some tags to it.Check if the added tags appear on the bottom of the page; Also, check if the tags appear on the homepage in the Tags sectionPass
"Delete a Tag"From a page, add some tags to it. After adding the tag, hover over it and press the small delete button.Check if the deleted tag disappears on the bottom of the page; Also, check if the tag has disappeared from the homepage in the Tags sectionPass
"Clicking a Tag"From a page, add some tags to it. Click on the tag you added.Redirected to a special page. Check if the document that has the tag you added is listed on this page.Pass
"Renaming Tag"From a page, add some tags to it. After page redirect, click on the "rename" button; You will be redirected to the rename tag page; put another name and click on "rename"Tag should be renamedPass-
"Deleting a Tag"From a page, add some tags to it. Click on the tag you added; After page redirect, click on "Delete" buttonTag should be deletedPass

Blog

Blog RSS

Feature Steps to followExpected ResultResultJIRA
"Blog RSS"From the "Quick Links" panel, click on the small RSS icon near the "Blog"Check if Blog RSS is properly displayedPass

Configure Blog

Feature Steps to followExpected ResultResultJIRA
"Configure Blog"Click on "Blog"; Click on the "Edit" button. Change the Blog Title and click "Save and View"Check if Blog homepage has another title. Also check if the breadcrumb has changed its namePass
"Configure Blog"Click on "Blog"; Click on the "Edit" button.Insert something in the Description area and click "Save and View"Check if the description you added appears on the Blog homepagePass
"Configure Blog"Click on "Blog"; Click on the "Edit" button.  Select from the "Blog type" the "Space Blog" and click "Save and View"Check if settings are savedPass

Create Post

Feature Steps to followExpected ResultResultJIRA
"Create a new post"Click on "Blog"; Fill in the Post Title; Click on "Create" Redirect to Edit pagePass

Edit Post

Feature Steps to followExpected ResultResultJIRA
"Edit a post"Click on "Blog"; Click on the pen to "Edit this blog post" Redirect to Edit pagePass

Edit Title

Feature Steps to followExpected ResultResultJIRA
Edit TitleClick on "Blog"; Click on the pen to "Edit this blog post"; Change the title from the "Title" field; Save the page;Title is changedPass

Edit Summary

Feature Steps to followExpected ResultResultJIRA
Edit SummaryClick on "Blog"; Click on the pen to "Edit this blog post"; Type in some text in the Summary box; Click "Save & View";See the summary when viewing the BlogPass

Category

Feature Steps to followExpected ResultResultJIRA
CategoryClick on "Blog"; Click on the pen to "Edit this blog post"; Check a category; Click "Save & View"; In the left "Blog Categories" panel click the category you checked;Look for the post therePass
"Add a category"Click on "Blog"; Click on the pen to "Edit this blog post"; Click "Add a Category"; Click "Cancel" Changes are discardedPass
"Add a category"Click on "Blog"; Click on the pen to "Edit this blog post"; Click "Add a Category"; Fill in the new category name; Click "Add" Category is createdPass
"Add a category"Click on "Blog"; Click on the pen to "Edit this blog post"; Hover over a category and click on the icon next to it; Click "Cancel" Changes are discardedPass
"Add a category"Click on "Blog"; Click on the pen to "Edit this blog post"; Hover over a category and click on the icon next to it; Fill in the new category name; Click "Add" Category is createdPass

Tags

Feature Steps to followExpected ResultResultJIRA
"Tags"Click on "Blog"; Click on the pen to "Edit this blog post"; Add a tag to the "Tags" field; Click "Save & View" Changes are saved; Tags should appear in Tags sectionPass

Publish Article

Feature Steps to followExpected ResultResultJIRA
"Publish Article"Click on "Blog"; Click on the pen to "Edit this blog post"; Check the "Publish" checkboxBlog article is published and the warning disappears from the blog pagePass
"Publish Article"Click on "Blog"; Go to the unpublished article. Click on the small icon near the pencil in order to publish it.Blog article is published and the warning disappears from the blog pagePass

Hide article

Feature Steps to followExpected ResultResultJIRA
"Hide article "Click on "Blog"; Click on the pen to "Edit this blog post"; Check "Hide Article"; Click "Save & View" Changes are savedPass
"Hide article "Click on "Blog"; Click on the pen to "Edit this blog post"; Check "Hide Article"; Click "Save & Continue" Changes are savedPass
"Hide article "Click on "Blog"; Click on the pen to "Edit this blog post"; Uncheck "Hide Article"; Click "Save & View" Changes are savedPass
"Hide article "Click on "Blog"; Click on the pen to "Edit this blog post"; Uncheck "Hide Article"; Click "Save & View" Changes are savedPass

Preview/Save/Cancel

Feature Steps to followExpected ResultResultJIRA
"Preview"Click on "Blog"; Click on the pen to "Edit this blog post"; Click "Preview"; Click "Back to edit" Back to edit pagePass
"Save & Continue"Click on "Blog"; Click on the pen to "Edit this blog post"; Click "Save & Continue" Changes are savedPass
"Save & Continue"Click on "Blog"; Click on the pen to "Edit this blog post"; Check "Is minor edit"; Click "Save & Continue" Changes are saved as a minor versionPass
"Save & View"Click on "Blog"; Click on the pen to "Edit this blog post"; Click "Save & View" Changes are savedPass
"Save & View"Click on "Blog"; Click on the pen to "Edit this blog post"; Check "Is minor edit"; Click "Save & View" Changes are saved as a minor versionPass
"Cancel"Click on "Blog"; Click on the pen to "Edit this blog post"; Click "Cancel" Discards changesPass
"Preview" in full screen Click on "Blog"; Click on the pen to "Edit this blog post"; Click on the "Edit in full screen" green button; Click "Preview"; Click "Back To Edit" Maximize edit windowPass
"Save & Continue" in full screenClick on "Blog"; Click on the pen to "Edit this blog post"; Click on the "Edit in full screen" green button; Click "Save & Continue" Maximize edit window and changes are savedPass
"Save & View" in full screenClick on "Blog"; Click on the pen to "Edit this blog post"; Click on the "Edit in full screen" green button; Click "Save & View" Maximize edit window, save changes and continue editingPass
"Cancel" in full screenClick on "Blog"; Click on the pen to "Edit this blog post"; Click on the "Edit in full screen" green button; Click "Cancel" Maximize edit window and discards changesPass

Color Themes

Feature Steps to followExpected ResultResultJIRA
"Color Themes"Click on "Color Themes"; Click the Default Theme Redirect to Default Theme pagePass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit" Edit page of ThemePass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Click "Cancel"  Check button functionalityPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Change the Page Background Color; Click "Preview"; Click "Back to Edit" Change in Theme PreviewPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Change the Page Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Change the Page Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Page Background Image; Click "Preview"; Click "Back to Edit" Change in Theme PreviewPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Page Background Image; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Page Background Image; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Page Background Image; Fill in the Page Background Image Position and Repeat; Click "Preview"; Click "Back to Edit" Change in Theme PreviewPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Page Background Image; Fill in the Page Background Image Position and Repeat; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Page Background Image; Fill in the Page Background Image Position and Repeat; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Page Header Background Color; Click "Preview"; Click "Back to Edit" Change in Theme PreviewPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Page Header Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Page Header Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Banner; Click "Preview"; Click "Back to Edit" Change in Theme PreviewPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Banner; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Banner; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Banner; Fill in the Banner Position and Repeat; Click "Preview"; Click "Back to Edit" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Banner; Fill in the Banner Position and Repeat; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Add a Banner; Fill in the Banner Position and Repeat; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Page Content Background Color; Click "Preview"; Click "Back to Edit" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Page Content Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Page Content Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Text Color; Click "Preview"; Click "Back to Edit" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Informative Text Color; Click "Preview"; Click "Back to Edit" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Informative Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Informative Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Details Text Color; Click "Preview"; Click "Back to Edit" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Details Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Details Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Link Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Link Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Link Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Title Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Title Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Title Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Menu Background Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Menu Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Menu Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Menu Text Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Menu Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Menu Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Selected Menu Entry Background Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Selected Menu Entry Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Selected Menu Entry Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Selected Menu Entry Text Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Selected Menu Entry Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Selected Menu Entry Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Background Color; Click "Preview"; Click "Back to Edit" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Text Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes" functionality Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Header Background Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Header Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Header Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Header Text Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Header Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes" functionality Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Panel Header Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Background Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Text Color; Click "Preview"; Click "Back to Edit" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Text Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Collapsed Panel Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Border Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Border Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Border Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Background Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Background Color; Click "Save & Continue"  Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Background Color; Click "Save & View"; Create a new document; Insert a Table; Click "Save & View"  Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Background Color for Highlighted Elements; Click "Preview"; Click "Back to Edit" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Background Color for Highlighted Elements; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Background Color for Highlighted Elements; Click "Save & View"; Go to Main; Hover over the Recent Changes Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Primary Action Button Text Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Primary Action Button Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Primary Action Button Text Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Primary Action Button Background Color; Click "Preview"; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Primary Action Button Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Primary Action Button Background Color; Click "Save & View" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Action Button Text Color; Click "Preview"; Hover over an Action Button; Click "Back to Edit" Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Action Button Text Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Action Button Text Color; Click "Save & View"; Hover over an Action Button Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Action Button Background Color; Click "Preview"; Hover over an Action Button; Click "Back to Edit"Back to Theme EditPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Action Button Background Color; Click "Save & Continue" Changes in Theme Preview are savedPass
Edit "Color Themes"Click on "Color Themes"; Click the Default Theme; Click "Edit"; Fill in the Secondary Action Button Background Color; Click "Save & View"; Hover over an Action Button Changes in Theme Preview are savedPass
Create "Color Themes"Click on "Color Themes"; Click on create new theme;Redirect to blank theme pagePass-

Panels

Feature Steps to followExpected ResultResultJIRA
"Create a new panel"Click on "Panels"  from Spaces Macro on Main Page; Fill in the new panel name; Click "Create"; Select the Type of the panel; Select the Category; Fill in the Panel Description; Fill in the Panel Content; Click "Preview"; Click "Back to Edit" Back to edit pagePass
"Create a new panel"Click on "Panels"  from Spaces Macro on Main Page; Fill in the new panel name; Click "Create"; Select the Type of the panel; Select the Category; Fill in the Panel Description; Fill in the Panel Content; Click "Save & Continue" Changes are saved; continue editingPass
"Create a new panel"Click on "Panels"  from Spaces Macro on Main Page; Fill in the new panel name; Click "Create"; Select the Type of the panel; Select the Category; Fill in the Panel Description; Fill in the Panel Content; Click "Save & View" Changes are savedPass
View Panel visualClick on "Panels"  from Spaces Macro on Main Page; Click on a panel Redirect to Panel's pagePass
Edit Panel visualClick on "Panels"  from Spaces Macro on Main Page; Click on the "Edit" link next to a panel; Click "maximize" Back to Panel's page in edit modePass
Edit PanelClick on "Panels"  from Spaces Macro on Main Page; Click on the "Edit" link next to a panel; Click "maximize" link; Click "Exit Full Screen" Maximized edit modePass
Edit PanelClick on "Panels"  from Spaces Macro on Main Page; Click on the "Edit" link next to a panel; Click "maximize"; Modify the text; Click "Preview"; Click "Back to Edit" Back to edit pagePass
Edit PanelClick on "Panels"  from Spaces Macro on Main Page; Click on the "Edit" link next to a panel; Click "maximize"; Modify the text; Click "Save & Continue" Changes are savedPass
Edit PanelClick on "Panels"  from Spaces Macro on Main Page; Click on the "Edit" link next to a panel; Click "maximize"; Modify the text; Click "Save & View" Changes are savedPass
Edit PanelClick on "Panels"  from Spaces Macro on Main Page; Click on the "Edit" link next to a panel; Click "maximize"; Click "Cancel" Maximize in and out worksPass
Delete PanelClick on "Panels"  from Spaces Macro on Main Page; Click on the "Delete" link next to a panel; Click Yes/No Able to delete documentPass

Document Index

Space index

Feature Steps to followExpected ResultResultJIRA
"See space index"For a space click on "Space" then click the "Document Index" Redirect to Document Index pagePass
Page "copy"For a space click on "See space index"; Click "copy"; Fill in the fields; click "copy" Redirect to Copy pagePass
Page "delete"For a space click on "See space index"; Click "delete"; Click "Yes/No" Redirect to confirmation pagePass
Page "rename"For a space click on "See space index"; Click "rename"; Click "Cancel" Redirect to Rename pagePass
Page "rename"For a space click on "See space index"; Click "rename"; Select a new space; Insert the new page name; Click on "Rename" Redirect to Rename pagePass
age "rights"For a space click on "See space index"; Click "rights" Redirect to Rights pagePass
"See space index"For a space click on "See space index"; Sort elements in the table by "Page" ascending Sort Elements by desired criteriaPass
"See space index"For a space click on "See space index"; Sort elements in the table by "Page" descending Sort Elements by desired criteriaPass
"See space index"For a space click on "See space index"; Sort elements in the table by "Date" ascending Sort Elements by desired criteriaPass
"See space index"For a space click on "See space index"; Sort elements in the table by "Date" descending Sort Elements by desired criteriaPass
"See space index"For a space click on "See space index"; Sort elements in the table by "Last Author" ascending Sort Elements by desired criteriaPass
"See space index"For a space click on "See space index"; Sort elements in the table by "Last Author" descending Sort Elements by desired criteriaPass

Document index

Feature Steps to followExpected ResultResultJIRA
"See space index"For a space click on "Space" then click the "Document Index" Redirect to Document Index pagePass
Page "copy"For a space click on "See space index"; Click "copy"; Fill in the fields; click "copy" Redirect to Copy pagePass
Page "delete"For a space click on "See space index"; Click "delete"; Click "Yes/No" Redirect to confirmation pagePass
Page "rename"For a space click on "See space index"; Click "rename"; Click "Cancel" Redirect to Rename pagePass
Page "rename"For a space click on "See space index"; Click "rename"; Select a new space; Insert the new page name; Click on "Rename" Redirect to Rename pagePass
Page "rights"For a space click on "See space index"; Click "rights";Redirect to Rename pagePass
"See document index"For a space click on "See document index"; Sort elements in the table by "Page" ascending Sort Elements by desired criteriaPass
"See document index"For a space click on "See document index"; Sort elements in the table by "Page" descending Sort Elements by desired criteriaPass
"See space index"For a space click on "See document index"; Sort elements in the table by "Date" ascending Sort Elements by desired criteriaPass
"See document index"For a space click on "See document index"; Sort elements in the table by "Date" descending Sort Elements by desired criteriaPass
"See document index"For a space click on "See document index"; Sort elements in the table by "Last Author" ascending Sort Elements by desired criteriaPass
"See space index"For a space click on "See document index"; Sort elements in the table by "Last Author" descending Sort Elements by desired criteriaPass
"Tree" TabFor a space click on "See space index"; Click "rename"; Select a new space; Insert the new page name; Click on "Rename" Redirect to Rename pagePass
"Orphaned Pages" tabRemove a page's parent from Wiki or WYSIWYG editor; Click on "See space index"; Click on "Orphaned Pages" tab; The page should be listed as orphanPass
"Attachments" tabFor a space click on "See space index";Click on  "Attachments" tab;All attachments from the wiki should be listedPass
"Deleted Documents" tabDelete a document;Click on "See space index"; Click on "Deleted Documents" tab;The deleted document should be listedPass-
"Deleted Attachments" tabDelete an attachment from a page;Click on "See space index"; Click on "Deleted Attachments" tab;The deleted attachment should be listedPass

Search

Feature Steps to followExpected ResultResultJIRA
"Search"On the top right corner, enter some text in the field and press enter;Redirects to Search pagePass
"Search"On the top right corner, enter some text in the field and press enter; On the page you are redirected to, filter out the a spaceCheck if the resulted pages are only from that spacePass
"Search" RSS On the top right corner, enter some text in the field and press enter; On the bottom of the page you are redirected to, click the "RSS feed for search on"Check if the results are displayed properly in a RSS formPass

Search Suggest

Feature Steps to followExpected ResultResultJIRA
"Search Suggest"On the top right corner, enter some text in the field;Wait for the AJAX window to appear with the resultsPass

User Status

Feature Steps to followExpected ResultResultJIRA
"Follow User"Login with your user. Go to another users homepage and click on "Follow" icon.Check if the "Following" icon becomes "Unfollow"  and see if the user listed in the table.Pass-
"Unfollow User"Login with your user. Go to your user page. Click on the x button to unfollow a user.The user should disappear from the tablePass-
"Unfollow User"Login with your user. Go to another users homepage and click on "Unfollow" icon.Check if the "Unfollow" icon becomes "Follow" and see if the user is no longer listed in the table.Pass-
"Send Message to Everyone"Login with your user. On the homepage, on the Activity Stream, select "Everyone" from the dropdown, enter your message and click on "Share"Check with another user that the message is visible on the Activity Stream.Pass
"Send Message to Followers"Login with your user. On the homepage, on the Activity Stream, select "Followers" from the dropdown, enter your message and click on "Share"Check with a user that is following you that the message is visible on his Activity Stream. Also, check with a user that is not following you that your message is not visible.Pass
"Send Message to Group"Login with your user. On the homepage, on the Activity Stream, select "Group" from the dropdown, enter your message and click on "Share"Check with a user within the group that your message is visible on his Activity Stream. Check with another user not belonging to the group that your message is not visible.Pass-
"Send Message to User"Login with your user. On the homepage, on the Activity Stream, select "User" from the dropdown, enter your message and click on "Share"The user will see your message on their Activity Stream page. Check with another user that the message is not visible.Pass-
"Delete Message"Login with your user. Add a new message, or hover over an existing one. Click on the x button in order to delete. A modal window will appear to ask for confirmationCheck if the message is deleted and disappears.Pass-

Macros

 

Dashboards Macro

Feature Steps to followExpected ResultResultJIRA
"Create dashboard page"Create a new page using the "Add" menu from top left corner. Edit the page using the WYSIWYG Editor and click on Macro -> Insert Macro. As an alternative way, you can edit the page in wiki mode and add a dashboard by typing {{dashboard}}You should have a blank dashboard. To see if the dashboard was  successfully added, edit the page using Inline mode. Check for the "Add Column" and "Add Gadget" buttonsPass-
"Edit Dashboard"From the dashboard page you created, click "Edit" then click on "Inline Form"Redirected to inline edit page. The "Add Gadget" and "Add Column" buttons should be visible.Pass
"Add a Gadget"From the dashboard page, click "Edit" then click on "Inline Form"; Click on "Add Gadget" button; Select a gadget from the list;Click on "Insert"; Click on "Save and View"; Add several gadgetsCheck if the newly added gadgets appears on the dashboardPass
"Add a Column"From the dashboard page, click "Edit" then click on "Inline Form"; Click on "Add Column" button; Click on "Save and View"; Add 3 or 4 columnsThe layout of the dashboard should change, creating new empty columns.Pass
"Drag-and-Drop" GadgetFrom the dashboard page, click "Edit" then click on "Inline Form"; Drag and drop gadgets in the position you want; Click on "Save and View"The gadgets you moved should appear in the desired positionPass
"Edit Dashboard" add "style" parameterFrom the dashboard page, click "Edit" then click on "Inline Form"; Hover over a gadget and the small gear icon; Click on the pencil icon that appears; In the style field, type "panels";The gadgets should now look like panels from the left side;Pass-
"Dashboard with source parameter"Create a new page using the "Add" menu from top left corner. Edit the page with the wiki editor and include the dashboard created in the previous step. To specify a dashboard that is outside the page, add the source parameters. You should have something like {{dashboard source="Space.Page" /}}, where Space.Page is the space and page where you created the dashboard.The dashboard should be included in your new page.Pass-
"Include dashboard" pageCreate a new page using the "Add" menu from top left corner. Edit the page with the wiki editor and include the dashboard created in the previous step. To include a dashboard we will use include macro. Type something like:
{{include document="Space.Page" /}}, where Space.Page is the space and page where you created the dashboard; Save the page;
You should see a blank dashboard. Try editing Inline the page and you should see the dashboard buttons. Not Tested-
"Include dashboard" pageCreate a new page using the "Add" menu from top left corner. Edit the page with the wiki editor and include the dashboard created in the previous step. To include a dashboard we will use include macro. Type something like:
{{include document="Space.Page" /}}, where Space.Page is the space and page where you created the dashboard; Edit the page with the Object Editor and add some gadgets by adding objects of XWiki.GadgetClass; fill in all the fields; Save the page
Your dashboard should have the gadgets you added with the Object viewer; Not Teste-
"Include dashboard" page with context parameterCreate a new page using the "Add" menu from top left corner. Edit the page with the wiki editor and include the dashboard created in the previous step. To include a dashboard we will use include macro. Type something like:
{{include document="Space.Page" context="new"/}}, where Space.Page is the space and page where you created the dashboard; Save the page;
You should see the dashboard you imported. Not Tested-
"Raw gadget edit"Edit Inline your dashboard or the page that includes your dashboard. Edit a gadget and in its content, put another syntax instead xwiki/2.0 syntax.Gadget should work properly, no matter what syntax is used in its content. Not Tested-
"Velocity title gadget"Edit Inline your dashboard or the page that includes your dashboard. Edit a gadget and insert some scripting elements in the Title field.Check if the title script is executed properly. Not Tested-
"Velocity title gadget"Edit Inline your dashboard or the page that includes your dashboard. Edit a gadget and insert some scripting elements in the Title field.Check if the title script is executed properly. Not Tested-
"Dashboard RSS"On the main page, from the "Quick Links" panel, click on the RSS icon near the "Wiki Dashboards"Check if the Dashboards content is properly presented in RSS formPass-

Attachment Selector Macro

Feature Steps to followExpected ResultResultJIRA
"Change User Profile Picture"Hover over your username from the top-right menu; click on "Profile"; Click on the small image icon on the top-left corner of the avatar image. Attach an image;See if the image is uploaded; See if the modal window disappears; See if the avatar was set as the last image you uploadedPass
"Change User Profile Picture"Hover over your username from the top-right menu; click on "Profile"; Click on the small image icon on the top-left corner of the avatar image; Select a image by pressing on the check-mark above it;Check if the avatar has changed; See if the modal window disappeared;Pass
"Delete User Profile Picture"Hover over your username from the top-right menu; click on "Profile"; Click on the small image icon on the top-left corner of the avatar image; Delete a image by pressing the delete button next to it.Check if the image disappears from the list and it is deleted;Pass-

Spaces Macro (from Home Page)

Feature Steps to followExpected ResultResultJIRA
"See space index"For a space click on "See Space Index" buttonRedirect to Space Index pagePass
"Create a new space"Click on "Create a new space"; Fill in the new space name; Click "Create" Redirect to Space WebHome pagePass
"Create a new space"Click on "Create a new space" twice;The field and button should appear/disappearPass
Tags:
   

Get Connected